Sidus Products

Explosion Proof Hazardous Area Compact HD IP Fixed Camera Station
Explosion Proof Hazardous Area Compact HD IP Fixed Camera Station with Wiper

Explosion Proof Compact Fixed Camera Series

This tiny Explosion Proof Compact HD IP Fixed Camera station is certified for use in hazardous areas. Its compact design makes this an extremely versatile camera station requiring very little space.

Features

  • Full HD resolution
  • DNV-type approval
  • EX certified for Zone 1 (gas group IIC) and Zone 21 (dust)
  • Digital WDR (Wide Dynamic Range)
  • Flexible powering (PoE, 30VAC, 24VDC)
  • Multi-cable accommodated
  • IR sensitive
  • 20 x optical zoom
  • Automatic day/night function
  • Scratch-proof, tempered glass
  • Auto focus and auto iris with manual override
  • Mounting bracket included
  • Built-in heating
  • Integrated Ex e junction box (option)
  • Integrated wiper (option)
  • Sunsheild (option)
  • Washer pump & tank (option)
  • Designed to accept future software upgrades remotely
Certifications Camera
Ex Code EX II 2 G

Ex d IIC T6 Gb

ATEX Presafe 15 ATEX 6337X
IECEx IECEx PRE 15.0017X
TR CU TR CU C-NO.GB05.B00872
INMETRO INMETRO DNV 14.0080X
Type Approval DNV GL Certificate No: TAA00000C8
Exe junction box (for configuration with jb)
Ex Code EX II 2 G Ex e IIC T6 Gb
ATEX DNV 10 ATEX 72715
IECEx IECEx DNV 10.0003
TR CU TR CU C-NO.GB05.B00872
INMETRO DNV 14.0079
Specifications – Physical Dimensions Camera
Weight 5.4 kg (w/o wiper)                5.5 kg (with wiper)
Dimensions (W x H x D) 155 x 192 x 188.5 mm (camera pointed horizontally and with optional sunshield)
Mounting Upright or hanging – bolts: M8 (not included)
Field Cabling Field cable installation through ATEX/IECEx approved compound gland, Gland M20X1.5 for 8.5-21.0mm cables (included)
Recommended Cable P/N 025223 from camera to jb/central rack
Material & Finish Stainless steel AISI 316L, electro polished
EX e junction box (for configuration with jb)
Weight 2.3 kg
Dimensions (W x H x D) 200 x 200 x 120 mm
Material & Finish ASIS 316L (stainless steel), thickness 1.5mm
Surface Treatment Grinded/Sand-blasted Stainless Steel
Lid/Door Gasket Polyurethane
Cable Gland 2 x M20 10.5 – 16 mm ATEX glands
Operating Conditions Camera
IP protection rate IP66 / IP67
Humidity Up to 100%
Operating temperature range -60° C to +55° C
For configuration with junction box
Operating temperature range -50° C to +55° C
For configurations with PoE IEEE802.3at
Operating temperature range -20° C to +55° C
For configurations with PoE IEEE802.3af
Operating temperature range -10° C to +55° C
Camera
Image sensor 1/2.8” progressive scan CMOS
Sync system Internal
Frame rate

 

50 Hz: 25 fps (1920 × 1080), 25 fps (1280 × 720)

60 Hz: 30 fps (1920 × 1080), 30 fps (1280 × 720)

Min. illumination

 

Color: 0.05 lux @ (F1.6, AGC ON)

B/W: 0.01 lux @ (F1.6, AGC ON)

S/N ratio / WDR > 50 dB / WDR
Lens
Focal length 4.7 – 94 mm, 20 x optical zoom
Aperture range F1.6 – F3.5
Angle of view 61.4° – 2.9° (wide – tele)
Min. working distance 10 mm – 1500 mm (wide – tele)
Zoom speed Approx. 2.7 s (optical, wide – tele)
Day & Night IR cut filter auto switch
Specifications – IP Specifications
Protocol IPv4/IPv6, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, SNMP, FTP, 802.1x, QoS, HTTPS, IPv6 (SIP, SRTP optional)
Compression

 

Main stream: H.264

Sub stream: H.264, MJPEG

H.264 compression profile Main profile, high profile
Dual-streaming Supported
Video bit rate 256 Kbps – 13 Mbps
Ethernet port 1 RJ45 10M/100M ethernet interface
Electrical data CAT6 cable, AWG23
Attributes
Power supply 30 VAC (+10% -30%, 50/60Hz) / 24 VDC (+/-10%) / PoE (IEEE802.3at/af)
Power consumption

 

30VAC: 7.0W Min, 26W Max (with heater on)

24VDC: 7.0W Min, 31W Max (with heater on)

PoE at: 7.0W Min, 20W Max (with heater on)

PoE af: 7.0W Min, 7.0W Max (No heater, by setting in RX292) (Temp.-10°C ~ +55°C)

Heat dissipation

 

30VAC: 7.0W Min, 26W Max (with heater on)

24VDC: 7.0W Min, 31W Max (with heater on)

PoE: 7.0W Min, 20W Max (with heater on)

Manual adjustment Pan/Tilt: 0-360°/65° down from horizontal view and 90º up(opposite for inverse mounting of base)
Accessories Tank & Pump 5.0L (EX Approved)
Optional

 

Sunshield

Safety wire

Cable gland

Can be delivered with gland entry pointing up or down to choose the most space-efficient solution

Ordering Requirements
The following code is designed to help in the selection of the correct unit.
part no:

 

097161-11x/466y

y = JB (junction box)

y = FL (2.5 m flying lead)

111/466 IP 30VAC 20xZ 1080p
115/466 IP 24VDC 20xZ 1080p
116/466 IP PoE 20xZ 1080p
111/466FL IP 30VAC 20xZ 1080p with Flying lead
115/466FL IP 24VDC 20xZ 1080p with Flying lead
116/466FL IP PoE 20xZ 1080p with Flying lead
111/466JB IP 30VAC 20xZ 1080p with EXE JB
115/466JB IP 24VDC 20xZ 1080p with EXE JB
116/466JB IP PoE 20xZ 1080p with EXE JB

This tiny Explosion Proof Compact HD IP Fixed Camera station is certified for use in hazardous areas. Its compact design makes this an extremely versatile camera station requiring very little space.

This CCTV surveillance and monitoring equipment camera station is purpose-built for extreme environments. With DNV-Type approval, the camera station is designed for operation in the most demanding locations, capable of withstanding physical environmental challenges like vibration, humidity, extreme temperature variations, and corrosion. Rated to IP 66 the camera station verifies protection from high-pressure water from any direction guaranteeing no harmful effects.

A single multi-cable is sufficient to transmit data, power, and video, routed directly to the control cabinet, eliminating the need for additional junction box equipment, and allowing for ease of installation, and configuration. The camera is equipped with scratch-proof, tempered glass lens, and supplied with a mounting bracket as standard.

Internal heating eliminates any risk of icing or malfunction due to low temperatures. The high-quality electro polished 316L Stainless Steel exterior ensures maximum resilience to environmental exposure and direct sunlight, avoiding heat absorption. Low power consumption combined with this reflective surface has resulted in the lowest surface temperature classification possible, i.e. T6.

The reliability of this tiny Explosion Proof Compact HD IP Fixed Camera has been proven on thousands of Oil & Gas CCTV installations worldwide. Additionally, it is designed to accept future software upgrade and diagnostics, remotely.