Sidus Products

Safe Area PTZ HD IP Camera with Pan & Tilt and Junction Box
[addtoany]

Safe Area HD IP PTZ Camera with Pan & Tilt and JB

The safe area HD IP PTZ camera with WDR, pan & tilt functions and built-in junction box is well suited for desert areas and for the corrosive environments on board marine vessels and oil & gas installations, in the frigid arctic as well as equatorial climates.

Features

  • Full HD resolution
  • 20x Zoom
  • IR sensitive
  • Wide Dynamic Range (WDR)
  • DNV-type approved
  • Automatic day/night function
  • Auto focus and auto iris with manual override
  • Preset position feature.with100 positions
  • Scratch-proof, tempered glass
  • Dual-streaming supported
  • Internal cabling, Multi-cable accommodated
  • Built-in thermoelectric heating
  • Flexible powering (30VAC, 115/230VAC)
  • Tropical sunshield, safety wire, gland and cables (options)
  • Designed to accept future software upgrades remotely
Certifications Camera
Type Approval DNV GL Certificate No: TAA00000C8
Specifications – Physical Dimensions Camera
Weight 19 kg
Dimensions (W x H x D) 304 x 430 x 298mm
Mounting Upright or hanging – bolts: M12 (not included)

Field cable installation through M20 gland for HERNIS™ cables (not

included)

Material & Finish Stainless steel AISI 316L, electro polished
Operating Conditions Camera
IP protection rate IP66 (≈ NEMA 4x)
Humidity Up to 100%
Operating temperature range -25°C ~ +55°C (Heating Element inside Housing)
Vibration 3 – 100 Hz (1 mm or 0,7 gr)
Enclosure Salt mist tested
Camera
Image Sensor 1/2.8” progressive scan CMOS
Sync System Internal
Frame Rate 50 Hz: 25 fps (1920 × 1080), 25 fps (1280 × 720)

60 Hz: 30 fps (1920 × 1080), 30 fps (1280 × 720)

Min. Illumination Color: 0.05 lux @ (F1.6, AGC ON)

B/W: 0.01 lux @ (F1.6, AGC ON)

S/N ratio / WDR > 50 dB / WDR
Lens 20 x optical                                              30 x optical
Focal length 4.7-94mm                                              4.5-135mm
Aperture range F1.6-F3.5                                                F1.6-F4.4
Angle of view 61.4-2.9°(wide-tele)                             65.1-2.35°(wide-tele)
Min. working distance 10mm-1500mm (wide-tele)               10mm-1500mm (wide-tele)
Zoom speed Approx. 2.7s (optical, wide-tele)       Approx. 3s (optical, wide-tele)
Day & Night IR cut filter auto switch                       IR cut filter auto switch
Specifications – IP Specifications
Protocol IPv4/IPv6, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, SNMP, FTP, 802.1x, QoS, HTTPS, IPv6 (SIP, SRTP optional)
Compression Main stream: H.264

Sub stream: H.264, MJPEG

H.264 compression profile Main Profile, High Profile
Dual Streaming Supported
Video bit rate 256 Kbs – 13 Mbps
Specifications fiber optics (FO)
Mode Single mode (SM), bi-directional transmission
Wavelength 1310/1550nm
Optical budget 19dB
Operating distance Up to 20 km
Connector 1 x LC connector on SFP module

FO Pigtail with LC fiber connector (not included) in fiber splice box (included)

Attributes
Power supply for configuration 351/466 30 VAC (+10% -30%, 50/60 Hz)
Power supply for configuration 354/466 115/230VAC (+/-10%)
Power consumption 30 VAC: 13W Min, (53W Max. heater on) (77W Max. PTZ on)

115/230VAC: 13W Min, (53W Max. heater on) (77W Max. PTZ on)

Rotating angle/variable speed Pan: 0-350° / speed 1.5°/sec. – 40°/sec

Tilt: ±90° / speed 1.5°/sec. – 20°/sec

Preset/home positions 96 preset + 4 home positions, accuracy ≤ 0.5°
Accessories
Optional Sunshield, tropical sunshield, safety wire, gland and cables
Ordering Requirements
The following code is designed to help in the selection of the correct unit.
part no: 097173-35x/4×6
351/466 1080p IP camera 20xZoom with Fiber media converter, 30VAC
351/486 1080p IP camera 30xZoom with Fiber media converter, 30VAC
354/466 1080p IP camera 20xZoom with Fiber media converter, 115/230VAC
354/486 1080p IP camera 30xZoom with Fiber media converter, 115/230VAC

The safe area HD IP PTZ camera with WDR, pan & tilt functions and built-in junction box is well suited for desert areas and for the corrosive environments on board marine vessels and oil & gas installations, in the frigid arctic as well as equatorial climates.

Designed specifically for operation in the most demanding conditions, this safe area, IR sensitive camera is built from high-quality electro polished 316L stainless steel, scratch-resistant tempered window glass, and includes a built-in heater.  The camera pan/tilt, zoom, focus, and iris functions are all automatic or manual, at any time to assure maximum accuracy and control. This camera station will quickly focus on a predefined object or area by utilizing the preset position feature. 100 positions are at your fingertips and will allow the operator to alternate between areas, processes, or objects rapidly. Additionally, its IP66 ingress protection makes it exceptionally resilient to extreme environmental conditions where vibration, humidity, extreme temperature variations, and corrosion are normal occurrences.

Installation is simple and a single cable is sufficient for the transmission of data and power, routed directly to the control cabinet.

This safe area camera station can work with illumination as low as 0.01 lux and has 1080p resolution. The future-proof design can facilitate future software upgrades and diagnostics remotely.