Sidus Products

Hernis EX286W PTZ JB Hazardous Area Explosion Proof Camera Station

Explosion Proof HD IP Pan & Tilt CCTV Camera Station with JB

The Explosion Proof HD IP Pan & Tilt Camera Station with integrated Junction Box are highly advanced process, and surveillance camera stations that hold DNV-type approval and are certified for use in hazardous areas. Pan/tilt, camera and junction box combined in one compact design make it an extremely versatile camera station choice.


  • Full HD resolution, IR sensitive, and 20 x zoom
  • DNV-type approval
  • EX certified for Zone 1 (gas group IIC) and Zone 2 (dust)
  • Digital WDR (Wide Dynamic Range)
  • Flexible powering (PoE, 30 VAC, 24 VDC)
  • Automatic day/night function
  • Sunshield, and scratch proof, tempered glass
  • Auto focus and Auto iris with manual override
  • Built-in thermoelectric heating, and integrated wiper
  • Integrated Ex e junction box
  • Washer pump & tank (option)
  • Designed to accept future software upgrades remotely
Certifications Camera
Ex Code EX II 2 G

Ex d IIC T6 Gb

ATEX Presafe 15 ATEX 6337X
IECEx IECEx PRE 15.0017X
TR CU TR CU C-NO.GB05.B00872
Type Approval DNV GL Certificate No: TAA00000C8
Exe junction box (for configuration with jb)
Ex Code EX II 2 G Ex e IIC T6 Gb
ATEX DNV 10 ATEX 72715
IECEx IECEx DNV 10.0003
TR CU TR CU C-NO.GB05.B00872
Specifications – Physical Dimensions Camera
Weight 5.4 kg
Dimensions (W x H x D) 155 x 192 x 188.5 mm (camera pointed horizontally and with optional sunshield)
Mounting Upright or hanging – bolts: M8 (not included)
Field Cabling Field cable installation through ATEX/IECEx approved compound gland, Gland M20X1.5 for 8.5-21.0mm cables (included)
Recommended Cable P/N 025223 from camera to jb/central rack
Material & Finish Stainless steel AISI 316L, electro polished
EX e junction box (for configuration with jb)
Weight 2.3 kg
Dimensions (W x H x D) 200 x 200 x 120 mm
Material & Finish ASIS 316L (stainless steel), thickness 1.5mm
Surface Treatment Grinded/Sand-blasted Stainless Steel
Lid/Door Gasket Polyurethane
Cable Gland 2 x M20 10.5 – 16 mm ATEX glands
Operating Conditions Camera
IP protection rate IP66 / IP67
Humidity Up to 100%
Operating temperature range -60° C to +55° C
For configuration with junction box
Operating temperature range -50° C to +55° C
For configurations with PoE IEEE802.3at
Operating temperature range -20° C to +55° C
For configurations with PoE IEEE802.3af
Operating temperature range -10° C to +55° C
Image sensor 1/2.8” progressive scan CMOS
Sync system Internal
Frame rate


50 Hz: 25 fps (1920 × 1080), 25 fps (1280 × 720)

60 Hz: 30 fps (1920 × 1080), 30 fps (1280 × 720)

Min. illumination


Color: 0.05 lux @ (F1.6, AGC ON)

B/W: 0.01 lux @ (F1.6, AGC ON)

S/N ratio / WDR > 50 dB / WDR
Focal length 4.7 – 94 mm, 20 x optical zoom
Aperture range F1.6 – F3.5
Angle of view 61.4° – 2.9° (wide – tele)
Min. working distance 10 mm – 1500 mm (wide – tele)
Zoom speed Approx. 2.7 s (optical, wide – tele)
Day & Night IR cut filter auto switch
Specifications – IP Specifications
Protocol IPv4/IPv6, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, SNMP, FTP, 802.1x, QoS, HTTPS, IPv6 (SIP, SRTP optional)


Main stream: H.264

Sub stream: H.264, MJPEG

H.264 compression profile Main profile, high profile
Dual-streaming Supported
Video bit rate 256 Kbps – 13 Mbps
Ethernet port 1 RJ45 10M/100M ethernet interface
Electrical data CAT6 cable, AWG23
Power supply 30 VAC (+10% -30%, 50/60Hz) / 24 VDC (+/-10%) / PoE (IEEE802.3at/af)
Power consumption


30VAC: 7.0W Min, 26W Max (with heater on)

24VDC: 7.0W Min, 31W Max (with heater on)

PoE at: 7.0W Min, 20W Max (with heater on)

PoE af: 7.0W Min, 7.0W Max (No heater, by setting in RX292) (Temp.-10°C ~ +55°C)

Heat dissipation


30VAC: 7.0W Min, 26W Max (with heater on)

24VDC: 7.0W Min, 31W Max (with heater on)

PoE: 7.0W Min, 20W Max (with heater on)

Manual adjustment Pan/Tilt: 0-360°/65° down from horizontal view and 90º up(opposite for inverse mounting of base)



Safety wire

Cable gland

Can be delivered with gland entry pointing up or down to choose the most space-efficient solution

Ordering Requirements
The following code is designed to help in the selection of the correct unit.
part no:



y = JB (junction box)

y = FL (2.5 m flying lead)

111/466 IP 30VAC 20xZ 1080p
115/466 IP 24VDC 20xZ 1080p
116/466 IP PoE 20xZ 1080p
111/466FL IP 30VAC 20xZ 1080p with Flying lead
115/466FL IP 24VDC 20xZ 1080p with Flying lead
116/466FL IP PoE 20xZ 1080p with Flying lead
111/466JB IP 30VAC 20xZ 1080p with EXE JB
115/466JB IP 24VDC 20xZ 1080p with EXE JB
116/466JB IP PoE 20xZ 1080p with EXE JB

PoE Complete Fixed PTZ camera station

Designed specifically for operation in explosive environments and the most demanding conditions, the Explosion Proof  HD IP with Junction Box Camera Station is built from high-quality electro-polished 316L stainless steel and has scratch-resistant tempered window glass and a built-in heater as standard.

This camera station will quickly focus on a predefined object or area by utilizing the preset position feature. 100 positions are at your fingertips and will allow the operator to alternate between areas, processes, or objects rapidly.

Additionally, the Explosion Proof HD IP camera carries global Ex and Marine certifications & approvals and when combined with its IP66 ingress protection it makes it exceptionally resilient to extreme environmental conditions where vibration, humidity, extreme temperature variations, and corrosion are a normal occurrence. Low power consumption combined with a reflective surface has resulted in the lowest surface temperature classification possible, i.e., T6.

Installation is simple and a single cable is sufficient for the transmission of data and power, routed directly to the control cabinet (standard Ethernet cable). The future-proof design facilitates future software upgrades and diagnostics remotely.

This Explosion Prood Camera Station can work with illumination as low as 0.01 lux, has 1080p resolution, and uses the  HERNIS™ FLEX IP control protocol.